Skip to product information
1 of 4

Davco Dustless Heavy Duty Tile Adhesive 西卡

Davco Dustless Heavy Duty Tile Adhesive 西卡

Regular price ₱480.00
Regular price Sale price ₱480.00

Heavy Duty Tile Adhesive

with Davco Dustless* technology

 

Davco Dustless Heavy Duty Tile Adhesive is a high quality, thick or thin bed (TTB) cement-based tile adhesive, the ideal partner for fixing ceramic, quarry, slate, marble, homogenous, low-porous porcelain and most monocottura tiles.

 

Packaging: 25kg bag

 

Coverage Guide:

- Using 6mm x 6mm notched trowel - approx. 6-7 sqm per 25kg bag

- Using 10mm x 10mm notched trowel approx. 5-6 sqm per 25kg bag

 

Uses / Area of Application

- Can be used to lay tiles onto concrete, cement render, block work and rendered brickwork surfaces.

- Can be used on walls and floors in both interior and exterior applications.

 

 

For further inquiries, bulk orders of this, and other related products - you may get also get in touch with our team, through our contact details here.

View full details

Instructions

Mixing and Application

Add one 25 kg bag of DAVCO DUSTLESS HEAVY DUTY Tile Adhesive to approximately 5 to 6 litres of clean water, mixing continuously until a lump - free, creamy consistency is achieved.

Allow the mix to stand for 3 - 5 minutes; remix then use the adhesive. Spread the adhesive onto the substrate using either a 6mm x 6mm notched trowel for wall tiling, or 10mm x 10mm notched trowel for floor tiling. The choice of trowel should be determined by the size of the tiles, depth of knobs, grooves or ridges on the back of the tile and evenness of the substrate.

• A 6mm x 6mm notched trowel is recommended for mosaic tiles.
• Thicker bed of adhesive allow for better contact to the substrate as well as picking up unevenness especially in the case of slates.
• For tiles with deep grooves or ridges, such as slate or lugged backed tiles, the adhesive should be butter coated onto the back of the tiles in addition to being notched - trowelled onto the substrate.
• Do not spread more than 1 square meter of adhesive at a time. Ensure that the adhesive is wet when the tiles are laid and tapped into position to ensure that there are no voids under the tiles.
• Install tiles within the duration of the open time.
• Do not disturb or walk-on tiles until they are laid for 24 hours.

Packaging Dimensions

45cm x 30cm x 10cm

Payment & Shipping

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation


(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH