Direction

1. Wear protective gloves, goggles and work clothes during use.
2. Clean surfaces of dirt, grease, excessive water and dust.
3. Moisten all substrate and freshly extruded foam with water for best results.
4. Use between 5-40°C.
5. Shake can for 2 minutes vigorously.
6. Take off cap, screw gun onto the foam.
7. Hold can UPSIDE DOWN with tube pointing into far end of cavity. Slowly press trigger to dispense foam. Test on experimental surfaces.
8. Fill cavity 40% with foam to allow for expansion.
9. Use acetone to remove excess uncured foam and to clean nozzle and valve.
10. Tack-free time is 20 minutes, cures in 24 hours.
11. Cured foam can be trimmed, painted, sanded, plastered, grouted, or caulked.

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation

(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH