Substrate Preparation:
• For all surfaces, loose contaminants and unsound concrete must be chipped away so that a reasonably rough, but strong sound surface is provided.
• All surface must be free from oil, grease and dust. This particularly applies to the underside of bedplates, bolts, pipes or other materials, which may have surface contact with the grout.
• Holes and depressions may be cleaned with compressed air to remove loose particles.
• The perimeter of any grouting area in a concrete substrate should be saw-cut at a minimum of 10mm to provide a mechanical key for the grout.

Surface Priming:
• After cleaning, saturate the concrete surface with clean water for approximately 2 hours prior to applying LANKO 702 PH DURABED.
• For horizontal holes, fill the hole with rags soaked in water. These rags can be periodically rewetted.
• Ensure that no freestanding water is present on surfaces of foundations or in bolt holes.
• Remove any free water by use of compressed air or dry towels.

Mixing Instructions:
• Mix 17 - 19% of water per 25kg bag.
• Adjustment to the mixing ratio may be required depending upon site conditions. Ideally, mixing water and substrate should be above the lower application temperature limit of 10° C and below 30° C to avoid problems with the setting time of the mix. Small trial batches to ascertain the best working consistency for the operation are recommended.
• Mix with an electric drill and paddle or revolving barrel type mixer. Do not mix by hand. Allow approximately 3-5 minutes mixing to achieve maximum results.

25kg bag (45cm x 30cm x 10cm)

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation

(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH