Mix the required quantity of Mortaseal Cementitious Waterproofing Compound with clean water in a suitable container until a smooth, free from lump substance to for paste-like slurry is achieved.

Applying with a brush, use a ratio of 10liters of water to 20kgs of Mortaseal powder.

To apply using a trowel, mix 6liters of water to 20kgs of Mortaseal powder,

Allow mixture to stand for 3 to 5 minutes, re-stir before using. Refrain from adding water to mixture which has already begun to set.

Application
Mortaseal paste slurry using paint brush or trowel unto the prepared concrete substrate. Apply brushing in one direction then leave for 2-4hours and let it dry.

Repeat application on a crosswise direction over the first coat. Repeat application as needed.

Make flood test 48hours after application to ensure no leaks will occur prior to preparation of all kinds of finishing.

For best result, install Fiber Mesh for excellent flexibility against structural movements.

coverage: 0.75kg to 1kg / sqm depending upon the prepared substrate

4.5kg gallon (8cm x 8cm x 21cm)
20kg bag (30cm x 10cm x 45cm)

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation

(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH