•
1 1

Mortaseal-Flexi Cementitious Waterproofing

Mortaseal-Flexi Cementitious Waterproofing

₱2,900.00
₱2,900.00
Packaging:

Flexible-Cementitious Waterproofing Compound

 

Mortaseal Flexi Cementitious Waterproofing is a single component cementitious waterproofing slurry uses advanced German aqua-block formulation to provide a permanent solution for leakages. It has a capillary system that penetrates and crystalizes cracks and holes creating a tough, flexible layer that effectively keeps water from flowing in or out of concrete substrates. No additives needed. Just add water


Packaging: in 20kg pail

Color: Grey

Mixing Ratio: 20kg Mortaseal-Flexi : 10 Liters Water

Coverage: approximately 6-7sqm triple coat per 20kg at 1mm thickness

 

Uses/Area of Application

- Suitable for precast substrates, as it prevents water seepage for both walls and floors

- Ideal for areas with regular structural movement

 

 

 

 

 

* Shipping fee is computed upon checkout | also available for same day pick-up

 

For further inquiries, bulk orders of this, and other related products - you may get also get in touch with our team, through our contact details here.

OTHERS BOUGHT THIS WITH
Waterproofing FiberMesh - Net type

₱1,800.00

Waterproofing FiberMesh - Cloth type

₱1,850.00

Mortaseal Cementitious Waterproofing Slurry

₱1,500.00

View full details

Instructions

Mix the required quantity of Mortaseal Flexi-Cementitious Waterproofing Compound with clean water in a suitable container until a smooth, free from lump substance to for paste-like slurry is achieved.

Applying with a brush, use a ratio of 10liters of water to 20kgs of Mortaseal Flexi powder.

To apply using a trowel, mix 6liters of water to 20kgs of Mortaseal powder,

Allow mixture to stand for 3 to 5 minutes, re-stir before using. Refrain from adding water to mixture which has already begun to set.

Application
Mortaseal paste slurry using paint brush or trowel unto the prepared concrete substrate. Apply brushing in one direction then leave for 2-4hours and let it dry.

Repeat application on a crosswise direction over the first coat. Repeat application as needed.

Make flood test 48hours after application to ensure no leaks will occur prior to preparation of all kinds of finishing.

For best result, install Fiber Mesh for excellent flexibility against structural movements.

coverage: 0.75kg to 1kg / sqm depending upon the prepared substrate

Packaging Dimensions

4.5kg gallon (8cm x 8cm x 21cm)
20kg bag (30cm x 10cm x 45cm)

Payment & Shipping

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation


(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH