1 2

Sikalastic HLM 5000 R (formerly MasterSeal HLM 5000 R)

Sikalastic HLM 5000 R (formerly MasterSeal HLM 5000 R)

₱9,060.00
₱9,060.00

Liquid cold-applied waterproofing membrane system

formerly MasterSeal HLM 5000 R

 

Sikalastic® HLM 5000 R is a single component, moisture curing, pure polyurethane based waterproofing membrane that cures by reaction with atmospheric moisture to form a tough membrane. Sikalastic® HLM 5000R protects structures from water penetration while remaining flexible to handle the nominal expansion and contraction of substrates.

 

Packaging: 25kg pail

 

Uses / Area of Application
Waterproofing for
▪ Flat and slope concealed roof structures
▪ For podium and green roof
▪ Balconies, planter box and parking garages
▪ Above grade between two cources of concrete or mansonry of cavity wall
▪ Exterior below grade on concrete and masonry

 

 

 

 

 

* Shipping fee is computed upon checkout | also available for same day pick-up

 

For further inquiries, bulk orders of this, and other related products - you may get also get in touch with our team, through our contact details here.

OTHERS BOUGHT THIS WITH
Sika Igolflex 130 - Bituminous Waterproofing

₱5,640.00

SikaProof Membrane 西卡

₱6,870.00

View full details

Instructions

MIXING
IMPORTANT
The Product is supplied ready to use.
Prior to application mix for at least 2 minutes using an
electric single-paddle mixer (300 to 400 rpm) until the
liquid and all coloured pigment has achieved a uniform colour.
APPLICATION
Strictly follow installation procedures
Strictly follow installation procedures as defined in
Method Statements, application manuals and working
instructions which must always be adjusted to the actual site conditions.
COATING
Always begin application with detailing (corners, upstands, joints) before installation of the main horizontal surfaces.
1.Apply Sikalastic® HLM 5000 R SL as self-primer
evenly over the surface with trowel or airless spray
equipment first then roller to evenly. If taking other
primer please follow application guidance.
2. Apply first layer bodycoat in trowel or airless spray
equipment. Note Maintain a "wet edge" during application to achieve a seamless finish.
3. For reinforced membrane lay the Sika® Reinforcement onto the wet base coat. Note The reinforcement
fibres must be fully encapsulated within the base coat.
4. Within overcoating time, apply second layer of the
product evenly over the surface with trowel or airless
spray equipment. Note Maintain a "wet edge" during
application to achieve a seamless finish.
5. The coating must be continuous, pore free and to
the required surface finish.

Payment & Shipping

FOR PAYMENT:
(1) Paymongo: Mastercard, VISA, GCash, Maya, Grab Pay
(2) Online Bank Transfer to our BDO, Metrobank, and BPI accountsFor more details, kindly check Accepted Modes of Payment

FOR SHIPPING:
(Customer Location) in Metro Manila (NCR)

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Metro Manila**
Lalamove/ Grab Pin: LPM Construction Supply and Wood Center Corporation


(Customer Location) in Pangasinan

(1) Rush – Same day Pick-up
(2) Regular Pick-up
(3) Pick-up/Delivery via Third Party*
(4) Delivery to Site locations in Pangasinan**
Lalamove/ Grab Pin: LPM Construction Supply PangasinanBrgy, Tayug-San Quintin Rd. Tayug,
Pangasinan, PH